Research Facilities Archive

03 Mar

Hydraulic power supply

Hydraulic power supply The hydraulic power is supplied to the laboratory through a 40 gpm MTS 506.41E and a 180 gpm S...

03 Mar

Group 3

Indoor fabrication space

Indoor fabrication space Two indoor fabrication spaces are available. These areas are intended for construction of la...

03 Mar

Group 3

Outdoor fabrication area and storage

Outdoor fabrication area and storage This zone is similar to an areaway to provide access to the SMRL. It has a retra...

03 Mar

Group 3

Workshop

Workshop The workshop houses powered and hand tools required for fabrication of test specimens, fixtures, and other i...

03 Mar

Group 3

Concrete materials room

Concrete materials room The concrete materials area is designated for mixing of cementitious materials and casting of...

03 Mar

Group 3

Materials curing/conditioning space

Materials curing/conditioning space The materials preparation area houses the equipment used to condition/cure specim...

03 Mar

Group 1

Shake table

Shake table A 3 DOF shake table is available with a payload capacity of 10,000 lbs. The shake table can simulate both...

03 Mar

Group 1

Reduced-scale reaction frame

Reduced-scale reaction frame Area A1b houses a reduced-scale reaction frame for structural testing. The reaction fram...

03 Mar

Group 2

Micro-CT scanner

Micro-CT scanner A state-of-the-art micro CT Nikon XT H 225 ST X-ray system scanner is now available in Viterbi Struc...

03 Mar

Group 1

Materials testing space

Materials testing space As seen on the right, the materials testing area houses the following equipment for character...